Donaldson
P544243
Direct Match
Partial Equivalence Note
Cross-reference published by Fleetguard for AF25955.
Air Filter15 Direct
Fleetguard
AF25955
Cross-reference and physical dimensional analysis for OEM/aftermarket reference AF25955. Inspect the specification table below before selecting a replacement cartridge or canister.
Equivalent Part Numbers(15 Cross-Matches)
Sorted by direct catalog match, then by 2-hop transitive inference.
OEM
2798
Direct Match
Partial Equivalence Note
Cross-reference published by Fleetguard for AF25955.
OEM
382034R
Direct Match
Partial Equivalence Note
Cross-reference published by Fleetguard for AF25955.
OEM
42798
Direct Match
Partial Equivalence Note
Cross-reference published by Fleetguard for AF25955.
OEM
542798
Direct Match
Partial Equivalence Note
Cross-reference published by Fleetguard for AF25955.
OEM
57MD318
Direct Match
Partial Equivalence Note
Cross-reference published by Fleetguard for AF25955.
OEM
87798
Direct Match
Partial Equivalence Note
Cross-reference published by Fleetguard for AF25955.
OEM
A150141
Direct Match
Partial Equivalence Note
Cross-reference published by Fleetguard for AF25955.
OEM
AF2320
Direct Match
Partial Equivalence Note
Cross-reference published by Fleetguard for AF25955.
OEM
CA9758
Direct Match
Partial Equivalence Note
Cross-reference published by Fleetguard for AF25955.
OEM
DBA5151
Direct Match
Partial Equivalence Note
Cross-reference published by Fleetguard for AF25955.
OEM
EAF5151
Direct Match
Partial Equivalence Note
Cross-reference published by Fleetguard for AF25955.
OEM
RS4572
Direct Match
Partial Equivalence Note
Cross-reference published by Fleetguard for AF25955.
OEM
RS4613
Direct Match
Partial Equivalence Note
Cross-reference published by Fleetguard for AF25955.
OEM
SA16839
Direct Match
Partial Equivalence Note
Cross-reference published by Fleetguard for AF25955.
Comparing the numbers
Figures come from each manufacturer as published, and equivalents rarely match to the millimetre. Thread pitch and gasket diameter have to match for the filter to seal at all. For height, diameter and bypass pressure, check the difference against what your engine manufacturer allows before fitting.